1.Hojo, M., Gustafson, C.-G., Tanaka, K., and Hayashi, R.
Near-Threshold Propagation of Delamination Fatigue Cracks in Unidirectional
CFRP in Air and
in Water
Proceedings of the Third Japan-U.S. Conference on Composite Materials,
pp. 117-124 (1986).
2.Hojo, M., Tanaka, K., Gustafson, C.-G., and Hayashi, R.
Effect of Water Environment on Propagation of Delamination Fatigue
Cracks in CFRP
Proceedings of the Sixth International Conference on Composite Materials
Combined with the
Second European Conference on Composite Materials, Vol. 4, pp. 222-231
(1987) Elsevier.
3.Hojo, M., Gustafson, C.-G., Tanaka, K., and Hayashi, R.
Mode I Propagation of Delamination Fatigue Cracks in CFRP
"Advanced Materials for Severe Service Applications", Iida,
K., and McEvily, A.J., Ed.,
pp. 353-372 (1987) Elsevier.
4.Hojo, M., Gustafson, C.-G., Tanaka, K., and Hayashi, R.
Mode I Propagation of Delamination Fatigue Cracks Near Threshold
in Unidirectional CFRP
Proceedings of the First Swedish-Japanese Seminar on Composite Materials,
pp. 52-67
(1987) Swedish Plastics and Rubber Institute, Stockholm.
5.Hojo, M., Tanaka, K., Gustafson, C.-G., and Hayashi, R.
Fracture Mechanics for Delamination Fatigue Crack Propagation of
CFRP in Air and in Water
"Interlaminar Fracture in Composites", Armanios, E. A.,
Ed., pp.149-160 (1989) Trans Tech
Publications.
6.Hojo, M., Tanaka, K., Gustafson, C.-G., and Hayashi, R.
Near-Threshold Propagation of Delamination Fatigue Cracks in Graphite/PEEK
Laminates
Proceedings of the Seventh International Conference on Composite
Materials, Vol.2,
pp. 511-516 (1989) Pergamon Press.
7.Nagasawa, C., Sembokuya, H., Hojo, M., Endo, K., Kemmochi, K., and Hayashi, R.
Tension-Tension and Delamination Fatigue Properties of CF/Epoxy Laminates
Advanced Composite Materials, Proceedings of the First France Japan
Seminar on
Composite Materials, pp.149-156 (1990) SIRPE.
8.Kemmochi, K., Koshizaki, N., Hojo, M., Takayanagi, H., Nagasawa, C., and Hayashi, R.
A Study on Prediction of Life due to Creep Behavior in CF/EPOXY &
CF/PEEK Laminates
Advanced Composite Materials, Proceedings of the First France-Japan
Seminar on Composite
Materials, pp.211-218 (1990) SIRPE.
9.Hojo, M., Tanaka, K., Gustafson, C-.G., and Kemmochi, K.,
Effect of Water Environment on Propagation of Delamination Fatigue
Cracks in Unidirectional
CF/PEEK Laminates
"Benibana" International Symposium, pp.285-290 (1990),
Yamagata University.
10.Hojo, M., Tateishi, Y., and Aoki, T.
Influence of Specimen Thickness on Mode I Interlaminar Fracture Toughness
of AS4/PEEK
and T800/Epoxy Laminates
Proceedings of the Fifth Japan-U.S. Conference on Composite Materials,
pp.193-200 (1990).
11.Kageyama, K., and Hojo, M.,
Proposed Methods for Interlaminar Fracture Toughness of Composite
Laminates
Proceedings of the Fifth Japan-U.S. Conference on Composite Materials,
pp.227-234 (1990).
12. Takayanagi, H., Sembokuya, H., Kemmochi, K., Hojo, M., and Maki, H.
Flexural Deformation and Fracture Behavior of Advanced Composite
Structures
Proceedings of the Fifth Japan-U.S. Conference on Composite Materials,
pp.161-168 (1990).
13.Hojo, M, Tanaka, K., Kemmochi, K., and Hayashi, R.
Delamination Fatigue Crack Propagation in CF/PEEK Laminates
Proceedings of 10th Tsukuba General Symposium-Advanced Composite
Materials Leading
Part for the 21st Century, pp57-63 (1990).
14.Yoshioka, M., Hojo, M., Kemmochi, K., Ban, K., and Iiyama, S.
IDAM: A Design Assist System for Composite Materials
Proceedings of 10th Tsukuba General Symposium-Advanced Composite
Materials Leading
Part for the 21st Century, pp291-298 (1990).
15.Suzuki, Y., Maekawa, Z., Hamada, H., Yokoyama, A., Sugihara, T., and Hojo, M.,
Influence of Silane Coupling Agents on the Interlaminar Fracture
in Glass Fiber Fabric Reinforced
Unsaturated Polyester Laminates
Proceedings of the Eighth International Conference on Composite Materials,
Vol. 1, pp.11-K
(1991).
16.Hojo, M., Tanaka, K., Gustafson, C-.G., and Kemmochi, K.,
Propagation of Delamination Fatigue Cracks in Unidirectional CF/PEEK
Laminates
Proceedings of the Sixth International Conference on Mechanical Behavior
of Materials, Vol. 2,
pp.531-536 (1991) Pergamon Press.
17.Sembokuya, H., Hojo, M, Aoki, T., Kemmochi, K., and Maki, H.,
Effects of Reinforcing Fiber and Matrix Resin on Delamination Fatigue
Crack Propagation in
CF/Epoxy Laminates
Proceedings of the Sixth International Conference on Mechanical Behavior
of Materials, Vol. 3,
pp.55-60 (1991) Pergamon Press.
18.Tanaka, H., Tanaka, K., and Hojo, M.,
Notched Fracture Strength of Unidirectional CFRP
Proceedings of the Sixth International Conference on Mechanical Behavior
of Materials,
Vol. 3, pp.417-422 (1991) Pergamon Press.
19.Kemmochi, K., Hojo, M., Hayashi, R., and Kagawa, Y.
Crack Growth Behavior of In-Plane Random-Oriented Short Carbon Fiber-Reinforced
Carbon
Proceedings of the Second Japan International SAMPE Symposium and
Exhibition, pp.905-911
(1991)
20.Hojo, M., Sawada, Y., and Miyairi, H.
Effects of Tab Design and Gripping Condition on Tensile Properties
of Unidirectional CFRP in
Fiber and Transverse DirectionProceedings of European Conference
on Composite Materials: Composites,
Testing and Standardization, pp.177-186 (1992).
21.Kageyama, K., Hojo, M., and Tanaka, K.
A Standardization Study on Interlaminar Fracture Toughness Tests
for CFRP Laminates in Japan
Proceedings of the Joint JSME/KSME Conference on Recent Progress
in Fracture Mechanics
pp.63-67 (1993).
22.Ochiai, S., Hojo, M., and Osamura, K.
Mesomechanical Approach to Deformation and Fracture Behavior of Unidirectional
Metal Matrix
Composites
Proceedings of Japan-Europe Symposium on Composite Materials, pp.142-147
(1993).
23.Ochiai, S., Osamura, K., Hojo, M., Matsunaga, K., Waku, Y., and Yamamura, T.
Mesomechanical Approach to Temperature-Dependence of Tensile Strength
of Continuous Fiber-
Reinforced Aluminum Matrix Composites
Proceedings of 10th International Conference on The Strength of Materials
(ICSMA 10),
pp. 389-392 (1994), The Japan Institute of Metals.
24.Hojo, M., Ochiai, S., Aoki, T., and Ito, H.
New Simple and Practical Test Method for Interlaminar Fatigue Threshold
in CFRP Laminates
Proceedings of European Conference on Composites Testing and Standardization
(ECCM-CTS 2),
pp.553-561 (1994).
25.Tanaka, K., Kageyama, K., and Hojo, M.
Standardization of Mode I and II Interlaminar Fracture toughness
Tests for CFRP in Japan
Proceedings of European Conference on Composites Testing and Standardization
(ECCM-CTS 2),
pp.533-541 (1994).
26.Ochiai, S., Nishino, S., Hojo, M., Osamura, K., and Watanabe, K.
Pre-loading Effect on Critical Current of Multifilamentary Nb3Sn
Superconducting Composite Wire
Proceedings of the 9th US-Japan Workshop on High-Field Superconducting
Materials, Wires and
Conductors and Standard Procedures for High-Fields Superconducting
Wires Testing, pp. 37-40
(1995).
27.Hojo, M., and Ochiai, S.
Effect of Mesoscopic Structure on Delamination Fatigue under Mode
I for CFRP Laminates
"COMPOSITES '95":Proceedings of the Seventh Japan-U.S.
Conference on Composite Materials,
pp.545-552 (1995).
28.Ochiai, S., Matsunaga, K., Hojo, M., and Osamura, K.
Tensile Strength of FRM as a Function of Temperature
Proceedings of the 2nd Pacific Rim International Conference on Advanced Materials and
Processing,
The Korean Institute of Metals and Materials, pp.2579-2586 (1995).
29.Tsujioka, N., Kotaki, M., Hojo, M., and Hamada, H.
Systematic Studies on the Relation Between Interfacial Properties
and Fracture Properties of
CFRP
Proceedings of the Tenth International Conference on Composite Materials,
pp. VI-501-507 (1995)
Woodhead Publishing.
30.Kotaki, M., Hojo, M., Tsujioka, N., and Hamada, H.
Effect of Surface Treatment on Interlaminar/Intralaminar Crack Growth
Behavior of CFRP
Laminates
Proceedings of the Fourth Japan International SAMPE Symposium, pp.1008-1013
(1995).
31.Hojo, M., Tsujioka, N., Kotaki, M., Hamada, H., Maekawa, Z., and Ochiai, S.
Effect of Interfacial Strength on Interlaminar and Intralaminar Fracture
Toughness of CFRP
Laminates "High Technology Composites in Modern Applications",
Paipetis S.A., and Youtsos, A.G., Eds.,
Proceedings of COMP'95, University of Patras, Greece, pp. 30-36 (1995)
32.Hojo, M., Matsuda, S. and Ochiai, S.
Effect of Matrix Resin on Mesomechanism of Mode II Delamination Fatigue
Crack Growth for CFRP
Laminates
Proceedings of Seventh European Conference on Composite Materials,
Vol. 1 , pp. 81-86 (1996)
Woodhead Publishing.
33.Ochiai, S., Nishino, S., Hojo, M., Osamura, K. and Watanabe, K.
Modeling Analysis of Pre-stress Effect on Upper Critical Magnetic Field and Critical Current of
Nb3Sn Composite Wire
The Science Reports of the Research Institutes Tohoku University
(Sci. Rep. RITU), Series A,
Vol. 42, No. 2, pp.389-395 (1996).
34.Hojo, M., Matsuda, S., and Ochiai, S.
Delamination Fatigue Crack Growth in CFRP Laminates under Mode I
and II Loadings
-Effect of Mesoscopic Structure on Fracture Mechanism-
Proceedings of International Conference on Fatigue of Composites,
pp.15-26 (1997).
35.Kusaka, T., Hojo, M., Kurokawa, T., and Ochiai, S.
Rate Effects on Mode I Interlaminar Fracture Toughness in Carbon-Fiber/Epoxy
and
Carbon-Fiber/ Toughened-Epoxy Composite Laminates
Proceedings of the Eleventh International Conference on Composite
Materials, Vol.2,
pp.II-234 - II-243 (1997)
36.Hojo, M., Matsuda, S., Moriya, K., Ochiai, S., and Murakami, A.
Fracture Mechanical Properties of Interlayer-Toughened CFRP
Proceedings of International Workshop on Advanced Materials for Functional
Manifestation of
Frontier and Environmental Consciousness, pp.49-56 (1997).
37.Matsuda, S., Hojo, M. and Ochiai, S.
Fracture Mechanism of Mode II Delamination Fatigue in Interlayer-Toughened
CFRP
Proceeding of the Fifth Japan International SAMPE Symposium, pp.
125-128 (1997).
38.Ochiai, S., Hojo, M., Inoue, T. and Matsuda, S.
Necessary Conditions to Minimize the Reduction in Strength of Fiber
with Cracked Coating Layer
Proc. International Symposium on Designing, Processing and Properties
of Advanced Engineering
Materials (ISAEM-97) pp.105-114 (1997).
39.Hojo, M., Kusaka, T., Kurokawa, T. and Ochiai, S.
Rate Dependence of Fracture Behavior in CF/Epoxy Laminates and Its
Influence on Static
Toughness Test Standardization
Proceedings of Fourth European Conference on Composites: Testing & Standardization,
pp.148-157 (1998).
40.Hojo, M., Matsuda, M., Ochiai, S. and Murakami, A.
Effect of Mesoscopic Structure on Interlaminar Fracture of Interlayer-Toughened
CFRP
First Asian-Australasian Conference on Composite Materials, pp. 711-1-4
(1998).
41.Kusaka, T., Hojo, M., Kurokawa, T. and Ochiai, S.
Rate-Dependent Mode II Interlaminar Fracture Properties of Carbon-Fiber/Epoxy
Composite
Laminates
First Asian-Australasian Conference on Composite Materials, pp. 713-1-4
(1998).
42.Ochiai, S., Tanaka, M. and Hojo, M.
Mesomechanical Modeling of Progress of Interfacial Debonding in Unidirectional
Fiber-Composites
First Asian-Australasian Conference on Composite Materials, pp. 606-1-4
(1998).
43.Nagai, I., Tanaka, T. and Hojo, M.
Relation between Damage and Absorbed Energy in CFRP Laminates Subjected
to Falling Weight
Impact
First Asian-Australasian Conference on Composite Materials, pp. 742-1-4
(1998).
44.Osamura, K., Nyilas, A., Shimada, M., Moriai, H., Hojo, M., Fuse, T. and Sugano, M.
Definition of Mechanical Properties Assessed by Room Temperature Tensile Test for the
Cu/Nb-Ti Composite Wires
Advances in Superconductivity XI, Proc. of the 11th Int. Symp. on
Superconductivity (ISS'98),
pp.1515-1518 (1998).
45.Murakami, A., Usui, Y., Anan, M., Asami, T., Akimoto, H., Hojo, M.,
Matsuda, S., Moriya, K.
and Ochiai, S.
Interlaminar Toughness and Damping Properties on Ionomer Interleaved
Composite
Proc. Seventh International Conference on Fibre Reinforced Composites
(FRC '98), University of
Newcastle upon Tyne, pp.231-236 (1998)
46.Hojo, M., Matsuda, S., Fiedler, B., Ochiai, S. and Aoyama, H.
Interlaminar Fracture Toughness and Delamination Fatigue of Alumina
Giber/Epoxy Laminates in Air and in Liquid Nitrogen
Proceedings of 7th Euro-Japanese Symposium "Composite Materials
and Transportation",
Ecoledes Mines de Paris, pp. 1-6 (1999).
47.Hojo, M., Matsuda, S., Ochiai, S., Murakami, A. and Akimoto, H.
The Role of Interleaf/Base Lamina Interphase in Toughening Mechanism
of Interleaf-Toughened
CFRP
Proceedings of Twelfth International Conference on Composite Materials
(ICCM-12/CD-ROM)
(1999).
48.Fiedler, B., Hojo, M., Ochiai, S. and Schulte, K.
FEM Modeling of the Initial Matrix Failure in CFRP under Transverse
Tensile Load
Proc. of the 6th Japan International SAMPE Symposium, pp. 563-566
(1999).
49.Fiedler, B., Schulte, K., Hojo, M. and Ochiai, S.
In Situ Observation of the Load Transfer in GFRP Composites by Photoelastic
Analysis
Proc. of the 6th Japan International SAMPE Symposium, pp. 875-878
(1999).
50.Matsuda, S., Akimoto, H., Shonaike, G.O., Murakami, A., Hojo, M. and Ochiai, S.
Impact properties and Interlaminar Fracture Toughness of Ionomer-Toughened
CFRP Laminates
International Workshop on Fracture Mechanics and Advanced Engineering
Materials (ed by Lin Ye
and Yiw-Wing Mai), pp. 356-363 (1999).
51.Ochiai, S., Sawada, T., Ohno, M., Hojo, M. and Watanabe, K.
Fracture Behavior and Its Influence on Superconducting Property of
Nb3Al Composite Wire
Proc. Ninth United States-Japan Conference on Composite Materials,
pp.185-192 (2000).
52.Hojo, M., Matsuda, S., Ochiai, S., Tsujioka, N., Nakanishi, Y., Maekawa, Z. and Murakami, A.
Mode II Interlaminar Properties under Static and Fatigue Loadings
for CF/Epoxy Laminates with
Different Fiber Surface Treatment
Proc. Ninth United States-Japan Conference on Composite Materials,
pp.291-298 (2000).
53. Hojo, M., Matsuda, S., Ochiai, S., and Murakami, A.
Mode II Static and Fatigue Delamination of Interlayer-Toughened CFRP
in Air and in Water
Proc. of the Second Asian-Australasian Conference on Composite Materials
(ACCM-2000),
pp. 987-992 (2000).
54.Ochiai, S., Kimura, S., Tanaka, M. and Hojo, M.
2D Simulation of Tensile Behavior of Fiber-Reinforced Brittle Matrix
Composites with Weak
Interface
Advances in Fracture Research, Proc. ICF10, CD-ROM, Ref.: ICF10042OR,
Pergamon (2001).
55.Hojo, M., Kawada, T., Machida, S., Moriya, K., Tanaka, M., Ochiai, S., Matsuda, S., Fiedler, B. and
Aoyama, H.
Effects of Fiber Type (CF and ALF) and Temperature (RT and 77K) on
Interlaminar Fracture
Properties of Composite Laminates with Common Epoxy Matrix
Durability Analysis of Composite Systems 2001, Proc. of the 5th Int.
Conf. on Durability Analysis
of Composite Systems -DURACOSYS 2001, Tokyo, Swets & Zeitlinger,
pp.385-392 (2002).
56.Hojo, M., Tanaka, M., Hobbiebrunken, T., Ochiai, S., Inoue, T. and Sawada, Y.
Interfacial Fracture of GF and CF/epoxy Model Composites under Static
and Fatigue Loadings
Proc. 8th International Fatigue Congress, Fatigue 2002, Stockholm,
EMAS, pp.231-238 (2002).
57.Ahn, J.J., Ochiai, S., Kwon, J.D., Hojo, M. and M. Tanaka, M.
Static and Fatigue Properties of the Al-SiC Particle Composites Degraded
by Thermal Cycling
Proc. 8th International Fatigue Congress, Fatigue 2002, Stockholm,
EMAS, pp. 2603-2610 (2002).
58.Fiedler, B., Hojo, M. and Ochiai, S.
The Parabolic Failure Criterion Applied to Epoxy Resin
Proc. International Conference on New Challenges in Mesomechanics 2002, Aalborg Univ.,
Denmark, pp.533-539 (2002).
59.Ochiai, S., Okuda, H., Tanaka, H., Tanaka, M., Hojo, M., Schulte, K. and Fiedler, B.
Shear Lag-Monte Carlo Simulation of Tensile Behavior of UD Ceramic
Matrix Composites
Advanced SiC/SiC Ceramic Composites: Developments and Applications in Energy Systems,
Ceramic
Transactions, Vol.144, The American Ceramic Society, pp.221-232 (2002).
This paper was also published in the extended abstract. of CREST
International Symposium on
SiC/SiC
Composite Materials R&D and Its Application to Advanced Energy
Systems, pp.217-226 (2002).
60.Hojo, M., Machida, S., Tanaka, M., Hobbiebrunken, T., Matsuda, S., Ochiai, S. and Ando, M.
Direct Comparison of CF/Epoxy Laminates and Its Neat Resin in Mode
I Interlaminar Fracture
Toughness and Fatigue Delamination at RT and 77K
Proceedings of Fourteenth International Conference on Composite Materials
(ICCM-14/CD-ROM)
(2003).
61.Hojo, M., Hirota, N., Ando, T., Matsuda, S., Tanaka, M., Amundsen, K., Ochiai, S. and Murakami, A.
Ionomer as Toughening and Repair material for CFRP Laminates
Repairing Structures using Composite Wraps, Proceedings of the 8th
Japanese-European
Symposium on Composite Materials,
Hermes Penton Science Ltd., pp.83-90 (2003).
62.Hobbiebrunken, T., Fiedler, B., Hojo, M., Tanaka, M., Ochiai, S. and Schulte, K.
Micromechanical Stress Formation and Initial Failure in Fiber Model
Composites under
Consideration of Plastic Deformation during Cooling Down
Proceedings of International Conference on Advanced Technology in
Experimental Mechanics
2003 (ATEM'03/ CD-ROM) (2003).
63.Tanaka, M., Okumura, I., Ochiai, S., Hojo, M., Sato, M., Ishikawa, T. and Matsunaga, K.
Monte Carlo Simulation on Fracture Behavior of Unidirectional Fiber
Reinforced Ceramics Based
on Mesomechanics
Proceedings of International Conference on Advanced Technology in Experimental Mechanics
2003 (ATEM'03/ CD-ROM) (2003).
64.Hobbiebrunken, T., Fiedler, B., Hojo, M., Tanaka, M., Ochiai, S. and Schulte, K.
Influence of Temperature Dependent Matrix Plasticity on the Formation
of Residual Stresses and
Initial Failure in CF-Epoxy
Proc. 8th Japan International SAMPE Symposium, pp.557-560 (2003).
65.Fiedler, B., Gagel, A., Hobbiebrunken, T., Schulte, K. , Hojo, M. and Ochiai, S.
Modeling of the Thermal Residual Stresses and Transverse Strength
of CFRP at Low and High
Temperature
Proceedings of 1st International Conference on Interfaces and Interphases
in Multicomponent
Materials (CD-ROM) (2003).
66.Tanaka, M., Hirosawa, Y., Hojo, M., Hobbiebrunken, T., Ochiai, S. and Sawada, Y.
Influence of Nonuniform Fiber Arrangement on Tensile Behavior of
Unidirectional Fiber Reinforced
Composites
Proceedings of 1st International conference on Interfaces and Interphases
in Multicomponent
Materials (CD-ROM) (2003).
67.Ochiai, S., Tomida, T., Tanaka, M., Hojo, M. and Okuda, H.
Fracture and Debonding Behavior of Coated Brittle Alumina layer on
Ductile Aluminum Substrate
Wire
Proceedings of 1st International Conference on Interfaces and Interphases
in Multicomponent
Materials (CD-ROM) (2003).
68.Hobbiebrunken, T., Fiedler, B., Hojo M., Tanaka M., Ochiai S. and Schulte K.
Micromechanical Analysis of Residual Stresses in CFRP: Influence
of Matrix Plasticity and Cooling
Conditions
Euromech 453, 1-3rd December 2003, pp.127-131.
69.Fiedler, B., Hobbiebrunken, T., Hojo, M., Schulte, K. and Ochiai, S.
FEM Modellierung der Thermischen Eigenspannungen und des Matrixversagens
in CFK
In: H-P. Degischer. Verbundwerkstoffe, 14. Symposium Verbundwerkstoffe
und Werkstoffverbunde,
Vienna, Austria, July 2-4, 2003. pp.599-604. In German.
70.Ochiai, S., Okuda, H., Hojo, M., Tanaka, M. and Watanabe, K.
Influence of Static and Fatigue Damages on Critical Current of Multifilamentary
Nb-Ti and Nb3Al
Superconducting Composite Wires
Proc. International Workshop on Progress of Nb-based Superconductors
(Tsukuba, February 2-3,
2004), pp.121-128
71.Hojo, M., Nakamura, M., Tanaka, M. and Ochiai, S.
Effect of Bending Deformation on Critical Current in Bi2223/Ag/Ag-alloy
Composite Superconducting Tapes
Proceedings of 11th European Conference on Composite Materials (ECCM11/CD-ROM)
(2004).
72.Hobbiebrunken, T., Fiedler, B., Hojo, M., Tanaka, M., Ochiai, S. and Schulte, K.
Micromechanical Yielding and Failure of CF/Epoxy caused by the Formation
of Residual Stresses
under
Macroscopic Boundary Conditions
Proceedings of 11th European Conference on Composite Materials (ECCM11/CD-ROM)
(2004).
73.Fiedler, B., Holst, S., Hobbiebrunken, T., Hojo, M. and Schulte, K.
Modelling of the initial failure of CFRP structures by partial discretisation:
a micro/macro-
mechanical approach of first ply failure
Proceedings of 11th European Conference on Composite Materials (ECCM11/CD-ROM)
(2004).
74.Matsumura, M., Tanaka, M., Ozasa, H., Hojo, M., Kitada, T. and Namiki, H.
Post-Tension Strengthening Via Carbon Fiber Sheet for Existing Steel
Bridge Girder
Proceedings of 11th European Conference on Composite Materials (ECCM11/CD-ROM)
(2004).
75.Ochiai, S., Okuda, H., Hojo, M., Tanaka, M. and Watanabe, K.
Relation of Functionality to Mechanical Behavior of Metal Matrix Composites: Applied
Stress-induced Change of Superconducting Critical Current of Bi2223/Ag,
Nb-Ti/Cu and
Nb3Al/Cu Composites
Design, Manufacturing and Applications of Composites, Proc. of the
Fifth Joint Canada-Japan
Workshop on Composites (2004) 3-10.
76.Namiki, H., Tanaka, M., Ozasa, H., Hojo, M., Kitada, T. and Matsumura, M.
Devices for CF sheet Post-tension strengthening for steel bridge
girder
The 6th China-Japan-US Joint Conference on Composite Materials (June,
2004), pp.133-139.
77.Ochiai, S., Sakai, Y., Sato, K., Ueda, T., Morishita, K., Okuda, H., Tanaka, M., Hojo, M., Waku, Y.,
Nakagawa, N., Sakata, S., Mitani, A. and Takahashi, T.
Tensile and bending behavior of melt growth Al2O3/YAG ceramic composite
at ultra high
temperatures (1773-2023K)
Materials Science Forum Vol.475-479, (2005), pp.1091-1096.
(Proceedings of The Fifth Pacific Rim International Conference on
Advanced Materials and
Processing (PRICM-5), Beijing, November 2-6, 2004)
78.Ochiai, S., Nakamura, T., Tomida, T., Okuda, H., Tanaka, M. and Hojo, M.
Fracture behavior of brittle coating layer on metal substrate
Materials Science Forum Vol.475-479, (2005), pp.929-932.
(Proceedings of The Fifth Pacific Rim International Conference on Advanced Materials and
Processing
(PRICM-5), Beijing, November 2-6, 2004)
79.Doko, D., Miyazaki, N., Nakamura, M., Ochiai, S., Okuda, H., Oh, S. S., Tanaka, M., Hojo, M. and
Osamura, K.
Bending damage evolution and its influence on critical current and
n-value of Bi2223/Ag superconducting composite tape
Materials Science Forum Vol.475-479, (2005), pp.933-936.
(Proceedings of The Fifth Pacific Rim International Conference on
Advanced Materials and
Processing (PRICM-5), Beijing, November 2-6, 2004)
80.Morishita, K., Tanaka, H., Kimura, S., Okuda, H., Ochiai, S., Tanaka, M., Hojo, M., Nakayama, H. and
Sato, M.
Fracture behavior and its shear lag-Monte Carlo simulation of SiC/SiC
Composite exposed in air
at high temperatures
Materials Science Forum Vol.475-479, (2005), pp.1101-1104.
(Proceedings of The Fifth Pacific Rim International Conference on
Advanced Materials and
Processing
(PRICM-5), Beijing, November 2-6, 2004)
81.Kusaka, T., Hojo, M., Fukuoka, T. and Ishibashi, M.
Effect of Strain Rate on the Interlaminar Fracture Toughness of Zanchor
Reinforced Composites
Proc. the JSME/ASME International Conference on Materials and Processing
2005 (M&P 2005)
IMP-12-1-5, June 19-22, 2005 (Seattle, USA), The American Society
of Mechanical Engineers
82.Hirose, Y., Hojo, M., Fujiyoshi, A. and Matsubara, G.
Suppression of Interfacial Crack for Foam Core Sandwich Panel with
Crack Arrester
Proc. 9th Japan International SAMPE Symposium (JISSE-9), Nov.29-Dec.2,
2005 (Tokyo, Japan)
CD-ROM
83.Tanaka, M., Aonuma, Y., Adachi, T., Kamioka, H., Takano-Yamamoto, T. and Hojo, M.,
Observation of calcium response of isolated osteocyte to localized
mechanical stimulus
2005-12, International Federation for Medical and Biological Engineering
Proceedings, Vol.12
(The 12th International Conference on Biomedical Engineering), CD-ROM.
84.Kusaka, T., Namiki, H., Urabe, K., Takeno, H., Tada, Y., Hojo, M., Watanabe, K. and Okubo, K.
Development of life-controllable-smart(LCS) concrete using recycled
PET resin blocks
Innovative Development, Characterizations and Applications of Composites
(CJJCC-7),
Ed. Zhang, Y. and Ni, Q.Q., 123-131, August 6-9, 2006 (Dunhuang,
China), China Agricultural
Science and Technology Press.